招聘职位：Type Test Validation Engineer 样机验证工程师

工作地点：西安

简历投递：welcome@xdge-auto.com

Main Responsibilities

• 根据功能规范和设计文件创建测试计划和测试程序;

Create test plans and test procedures from functional specification and design document.

• 除简单的功能验证测试，设计包括性能，边界和缺陷测试；

Design tests beyond simple functional verification to include performance, boundary and negative testing

• 确定并确保可追溯性要求测试用例；

Identify and ensure requirements traceability to test cases

• 设计足够的测试覆盖率的测试，以确保坚固和可靠的软件

Devise tests for adequate test coverage to ensure robust and reliable software

• 识别并报告在测试过程中发现的缺陷和问题，使用缺陷跟踪系统

Identify and report defects and issues detected during testing, using the defect tracking system

• 协助缺陷报告的优先次序，并协助测试主管和开发人员一同解决缺陷问题；

Assist in prioritization of reported defects and work with test lead and developers to facilitate closure

• 验证解决的缺陷

Verify resolution of resolved defects

• 确保测试记录的准确和完整；

Ensure test records are accurate and complete

• 参加文档和测试程序评审；

Participate in documentation and test procedure reviews

Qualifications Required:

• 电气工程本科学历或相等工作经验·

Degree in electrical engineering or equivalent

• 至少2年验证经验

A minimum of 2 years of verification experience

• 熟悉测试设备使用，如万用表，示波器和信号发生器。

Experience with the use of test instruments such as multi-meters, oscilloscopes, and signal generators

• RTDS和电力仿真仪器知识；

Knowledge in RTDS and power simulation instrument;

• 有国际和国内的ALT，震动测试以及电磁兼容测试标准的经验；·

Experience in ALT, Vibration, EMC testing in accordance with international and GB Standards;

• 关注细节和准确性；

Attention to detail and accuracy;

• 精通Windows办公软件和绘图工具，如MS Word ， Visio和Excel

Proficient in the use of Windows office software and drawing tools such as MS Word, Visio and Excel.

• 团队协作能力和独立判断并作出决定的能力；

Able to work both as part of a team and independently utilizing sound judgment to make decisions.

经验要求Desired Skills/Experience:

• 具有工业通信协议知识;如 DNP3 ，MODBUS ， IEC 60870-5-101/103/104 ， IEC 61850

Knowledge with industrial communication protocols; DNP3, Modbus, IEC 60870-5-101/103/104, IEC 61850.

• 熟悉网络概念和协议，如TCP / IP和FTP

Familiarity with networking concepts and protocols such as TCP/IP and FTP

• 熟悉SCADA设备及电力设备和概念

Familiarity with electric utility SCADA equipment and concepts

• 具有产品验证的经验

Experience with product assurance activitiesMain Responsibilities

• 根据功能规范和设计文件创建测试计划和测试程序;

Create test plans and test procedures from functional specification and design document.

• 除简单的功能验证测试，设计包括性能，边界和缺陷测试；

Design tests beyond simple functional verification to include performance, boundary and negative testing

• 确定并确保可追溯性要求测试用例；

Identify and ensure requirements traceability to test cases

• 设计足够的测试覆盖率的测试，以确保坚固和可靠的软件

Devise tests for adequate test coverage to ensure robust and reliable software

• 识别并报告在测试过程中发现的缺陷和问题，使用缺陷跟踪系统

Identify and report defects and issues detected during testing, using the defect tracking system

• 协助缺陷报告的优先次序，并协助测试主管和开发人员一同解决缺陷问题；

Assist in prioritization of reported defects and work with test lead and developers to facilitate closure

• 验证解决的缺陷

Verify resolution of resolved defects

• 确保测试记录的准确和完整；

Ensure test records are accurate and complete

• 参加文档和测试程序评审；

Participate in documentation and test procedure reviews

Qualifications Required:

• 电气工程本科学历或相等工作经验·

Degree in electrical engineering or equivalent

• 至少2年验证经验

A minimum of 2 years of verification experience

• 熟悉测试设备使用，如万用表，示波器和信号发生器。

Experience with the use of test instruments such as multi-meters, oscilloscopes, and signal generators

• RTDS和电力仿真仪器知识；

Knowledge in RTDS and power simulation instrument;

• 有国际和国内的ALT，震动测试以及电磁兼容测试标准的经验；·

Experience in ALT, Vibration, EMC testing in accordance with international and GB Standards;

• 关注细节和准确性；

Attention to detail and accuracy;

• 精通Windows办公软件和绘图工具，如MS Word ， Visio和Excel

Proficient in the use of Windows office software and drawing tools such as MS Word, Visio and Excel.

• 团队协作能力和独立判断并作出决定的能力；

Able to work both as part of a team and independently utilizing sound judgment to make decisions.

经验要求Desired Skills/Experience:

• 具有工业通信协议知识;如 DNP3 ，MODBUS ， IEC 60870-5-101/103/104 ， IEC 61850

Knowledge with industrial communication protocols; DNP3, Modbus, IEC 60870-5-101/103/104, IEC 61850.

• 熟悉网络概念和协议，如TCP / IP和FTP

Familiarity with networking concepts and protocols such as TCP/IP and FTP

• 熟悉SCADA设备及电力设备和概念

Familiarity with electric utility SCADA equipment and concepts

• 具有产品验证的经验

Experience with product assurance activities